Automatic Four Feet 220V Roll Drive Shaft Welding Machine
1. Product description
Automatic Four Feet 220V Roll Drive Shaft Welding Machine is used for making wire mesh. Mainly used for the construction mesh.Welding wire diameter 0.8mm-2.5mm.Welding mesh size 1"-4". Welding width 914-2100(mm).Speed of welding 60-90 times/min. Nominal voltage 380v 3 phase electric 50Hz. Nominal power 80X5 KVA . Exterior size 3100× 1700× 1400.
2. Technical parameter
| Model | Mesh width | Minimum mesh size (inch) | Wire diameter(mm) | Welding speed (rows/min) | Roll mesh length (m) | Other available mesh size (inch) |
| R- DHW | 6 feet | 1/2x1/2 | 0.45-0.85 | 90-120 | 130 | 1/2x1, 1x1/2, 1x1, 2x2 |
| R- DHW | 6 feet | 1/2x1/2 | 0.6-1.3 | 90-120 | 110 | 1/2x1, 1x1/2, 1x1, 2x2 |
| R- DHW | 6 feet | 1/2x1/2 | 0.8-1.6 | 80-90 | 100 | 1/2x1, 1x1/2, 1x1, 2x2 |
| R- DHW | 6 feet | 1x1 | 0.45-0.85 | 90-120 | 130 | 1x2, 2x1, 2x2, 2x4 |
| R- DHW | 6 feet | 1x1 | 0.6-1.3 | 90-110 | 110 | 1x2, 2x1, 2x2, 2x4 |
| R- DHW | 6 feet | 1x1 | 0.8-1.6 | 90-110 | 100 | 1x2, 2x1, 2x2, 2x4 |
| R- DHW | 6 feet | 1x1 | 1.4-2.6 | 80-90 | 80 | 1x2, 2x1, 2x2, 2x4 |
3. Application area
Automatic Four Feet 220V Roll Drive Shaft Welding Machine is widely used to make wall mesh, concrete mesh, construction mesh, breed cage etc.
4. Advantages
a. To increase safety of machine, we protect every transmission part(chain,rotate)with protective cover,and add switch in the electric cabinet.
b. Welding pressure steplessly adjust to apply multiple wire diameter.
c. Line wire vertical straightening system to provide high quality.
